National Scumble Glaze is a washable coating, an environmentally friendly pearlscent finish, used for creating attractive broken color effects to the substrates.
National Scumble Glaze is ideally recommended for interior application and can be used on concrete, gypsum boards, plaster and woodworks.
All colors are available as per National Scumble Glaze Color Card in condition that base coat color is special black.
National Scumble Glaze is supplied in a ready to use form. If required, dilute with 5% water.
Cleaning of Equipment:
Clean the equipment with water immediately after completing the work.
Theoretical Spreading Rate:
10 -15 m2 / Liter depending on the application method, film thickness and nature of surface.
Touch dry: 2 - 3 hours
Full dry: 6 - 8 hours
The surface on which National Scumble Glaze is to be applied should be dry, free of oil, dust, efflorescence etc.
First, apply one coat of National Acrylic Primer (W.B.), then one coat of National shield top-coat silk special black as base coat by using a roller.
Allow it to dry for 2 hours.
For the finish coat, Apply National Scumble Glaze by using a roller.
Create the required design by using a scraper in converging strokes. Until the design of decoration is achieved while the film is still wet. Allow it to dry to 2-3 hours.
The required pattern of decoration is determined by the painter. The product should be spread over to get a uniform pattern of application.